| ausmini https://ausmini.com/forums/ |
|
| Sunvisor screw location https://ausmini.com/forums/viewtopic.php?f=2&t=93593 |
Page 1 of 1 |
| Author: | idr17 [ Sun Aug 28, 2016 9:59 am ] |
| Post subject: | Sunvisor screw location |
Does anyone have a photo of the position of the sunvisor screws for a 1967 Cooper S? I had a new roof lining fitted some time back and now I can't locate the screw holes and not sure what type of screws they use. |
|
| Author: | Minicooper4me [ Sun Aug 28, 2016 7:50 pm ] |
| Post subject: | Re: Sunvisor screw location |
Are theses the ones ? Right hand side in first photo, left hand side in second photo. |
|
| Author: | idr17 [ Mon Aug 29, 2016 4:27 pm ] |
| Post subject: | Re: Sunvisor screw location |
Minicooper4me wrote: Are theses the ones ? Right hand side in first photo, left hand side in second photo. Brilliant thanks for that. |
|
| Author: | IndigoBlueCooperS [ Mon Aug 29, 2016 7:15 pm ] |
| Post subject: | Re: Sunvisor screw location |
Hi Minicooper4me, What model Mini are the photos from? First time I have seen that arrangement with the speed nuts. Ones I have seen have small holes for self tappers on either side of each visor. (With 850's having the two holes close together. |
|
| Author: | winabbey [ Mon Aug 29, 2016 8:54 pm ] |
| Post subject: | Re: Sunvisor screw location |
Are your visors like these in a MK II S? If so does the mounting position and method help? Or are they one of the types in the parts book? Attachment: MK II S Sun Visor 2.jpg Attachment: MK II S Sun Visor 1.jpg Attachment: PUB1012 RM02 L.jpg
|
|
| Author: | Minicooper4me [ Mon Aug 29, 2016 9:05 pm ] |
| Post subject: | Re: Sunvisor screw location |
Mine are number 27 in Doug's part book. Mine are standard 1966 deluxe and only saw the speed nuts which hold the self tappers when I stripped the body bare for the rebuild. When I fitted the new hood lining, I took photos first, then cut out the hood lining hole when fitting the new lining. |
|
| Author: | idr17 [ Tue Aug 30, 2016 6:16 pm ] |
| Post subject: | Re: Sunvisor screw location |
winabbey wrote: Are your visors like these in a MK II S? If so does the mounting position and method help? Or are they one of the types in the parts book? Attachment: MK II S Sun Visor 2.jpg Attachment: MK II S Sun Visor 1.jpg Attachment: PUB1012 RM02 L.jpg Spot on, the ones in the photos are the same as mine, thanks mate. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|