Remove
Install
| ausmini https://ausmini.com/forums/ |
|
| If I want to fit Hardy Spicer over rubber universal https://ausmini.com/forums/viewtopic.php?f=2&t=93588 |
Page 1 of 2 |
| Author: | 71morris [ Sat Aug 27, 2016 10:01 pm ] |
| Post subject: | If I want to fit Hardy Spicer over rubber universal |
If I want to fit Hardy Spicer over rubber universal joints do I need to change the output shaft covers to Hardie spicer? anything else? |
|
| Author: | timmy201 [ Sat Aug 27, 2016 10:09 pm ] |
| Post subject: | Re: If I want to fit Hardy Spicer over rubber universal |
Remove Install
|
|
| Author: | drmini in aust [ Sat Aug 27, 2016 10:10 pm ] |
| Post subject: | Re: If I want to fit Hardy Spicer over rubber universal |
Are you using the Hardy Spicer joints, flanges and drive yokes as used on the S and GT? If so you need the S side covers, also S diff output shafts (with their collets and bolts). If you are keeping the rubber uni's drive yokes and fitting QL5000 Hardy Spicer joints instead of rubber, then no. |
|
| Author: | gtogreen1969 [ Sat Aug 27, 2016 10:22 pm ] |
| Post subject: | Re: If I want to fit Hardy Spicer over rubber universal |
timmy201 wrote: Remove Install Nice reference photos. Thanks |
|
| Author: | 71morris [ Sat Aug 27, 2016 10:23 pm ] |
| Post subject: | Re: If I want to fit Hardy Spicer over rubber universal |
I need the S diff output shafts with their collets and bolts can you get them second hand or is it better new from a supplier? |
|
| Author: | drmini in aust [ Sat Aug 27, 2016 11:02 pm ] |
| Post subject: | Re: If I want to fit Hardy Spicer over rubber universal |
These parts were also used in the MiniMatics. But their side covers don't fit manuals. |
|
| Author: | timmy201 [ Sun Aug 28, 2016 6:32 am ] |
| Post subject: | Re: If I want to fit Hardy Spicer over rubber universal |
gtogreen1969 wrote: timmy201 wrote: Remove https://farm9.staticflickr.com/8590/166 ... 094e_b.jpg Install https://farm9.staticflickr.com/8610/164 ... 6f3f_b.jpg Nice reference photos. Thanks They are out of my build thread on here. Wasn't that a fun job! |
|
| Author: | FNQ [ Sun Aug 28, 2016 9:01 am ] |
| Post subject: | Re: If I want to fit Hardy Spicer over rubber universal |
i hadn't realized the bolt/collet arrangement on the output shaft was so beefy. Is there room for a normal socket and is a replacement bolt available new/ uprated / etc? ( Great photo Tim).. I did quickly look at minispares site but couldn't find |
|
| Author: | 71morris [ Sun Aug 28, 2016 12:30 pm ] |
| Post subject: | Re: If I want to fit Hardy Spicer over rubber universal |
where to buy second hand or new? S diff output shafts |
|
| Author: | FNQ [ Sun Aug 28, 2016 2:08 pm ] |
| Post subject: | Re: If I want to fit Hardy Spicer over rubber universal |
ok , so complete with the output shaft... makes sense Thanks |
|
| Author: | MINImal effort [ Sun Aug 28, 2016 2:22 pm ] |
| Post subject: | Re: If I want to fit Hardy Spicer over rubber universal |
Originals parts getting hard to come by.... (though I managed to get some NOS out of Chile a year or so ago !) As an alternative can now buy Pot Joint Diff adapters for Hardy Spicer.... should leak less oil  - but would need the Pot Joint diff parts (but should be easier to come by)I got some via Harris Motorsport - but he's since retired ... the bling versions: http://www.swiftune.com/Product/593/swiftune-hardy-spicer-output-flanges-for-atb-and-potjoint-diffs-pair.aspx http://www.med-engineering.co.uk/products/transmission/drivetrain/med-hardy-spicer-adaptors |
|
| Author: | winabbey [ Sun Aug 28, 2016 2:52 pm ] |
| Post subject: | Re: If I want to fit Hardy Spicer over rubber universal |
Try MKO. They have second-hand components and also conversion kits to pot joints. http://minikingdomonline.com.au/product ... r-s-2hand/ http://minikingdomonline.com.au/product ... pot-joint/ http://minikingdomonline.com.au/product ... pot-joint/ |
|
| Author: | 71morris [ Sun Aug 28, 2016 3:59 pm ] |
| Post subject: | Re: If I want to fit Hardy Spicer over rubber universal |
Also need the collets and special washers bolts can see the collets on the MKO site but not the special washers and bolts? found the bolt but not the star washer? between the collets and oil seal. |
|
| Author: | TheMiniMan [ Sun Aug 28, 2016 4:27 pm ] |
| Post subject: | Re: If I want to fit Hardy Spicer over rubber universal |
i have the whole lot 2nd hand here in Bne if you`re keen it`s an "engine-out" job, swap diff stuff over, shove engine back in cheers matt 0407135656 |
|
| Author: | timmy201 [ Mon Aug 29, 2016 8:31 am ] |
| Post subject: | Re: If I want to fit Hardy Spicer over rubber universal |
71morris wrote: Also need the collets and special washers bolts can see the collets on the MKO site but not the special washers and bolts? found the bolt but not the star washer? between the collets and oil seal. I bought a couple of sets of the washers from the local fastener shop. Very cheap! Edit: Some useful bits on eBay for you http://www.ebay.com.au/itm/152220380438 ... EBIDX%3AIT http://www.ebay.com.au/itm/191956034189 ... EBIDX%3AIT |
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|