| ausmini https://ausmini.com/forums/ |
|
| Hs2 throttle return https://ausmini.com/forums/viewtopic.php?f=2&t=93473 |
Page 1 of 1 |
| Author: | Thorlek [ Wed Aug 17, 2016 1:01 pm ] |
| Post subject: | Hs2 throttle return |
Hi all, My mate is retoring a 62 850. He isn't sure how the throttle return spring works on it. On my hs4 there is a bracket between the carb and the manifold that the spring connects to. Are hs2's the same? Or do the return springs connect somewhere else? |
|
| Author: | timmy201 [ Wed Aug 17, 2016 2:08 pm ] |
| Post subject: | Re: Hs2 throttle return |
From memory, mine had a little bracket on the exhaust clamp? Part #30 i the diagram - 12A5 http://www.minispares.com/catalogues/cl ... spx?1~6~58 |
|
| Author: | DavidE [ Wed Aug 17, 2016 2:09 pm ] |
| Post subject: | Re: Hs2 throttle return |
timmy201 wrote: From memory, mine had a little bracket on the exhaust clamp? Part #30 i the diagram - 12A5 http://www.minispares.com/catalogues/cl ... spx?1~6~58 Correct. |
|
| Author: | timmy201 [ Wed Aug 17, 2016 2:22 pm ] |
| Post subject: | Re: Hs2 throttle return |
It's just a bent piece with a hole in each end. There is a diagram here http://mk1-forum.net/viewtopic.php?f=8& ... hilit=12a5 |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|