| ausmini https://ausmini.com/forums/ |
|
| Idle screw https://ausmini.com/forums/viewtopic.php?f=2&t=93328 |
Page 1 of 1 |
| Author: | belldane [ Tue Aug 02, 2016 4:12 pm ] |
| Post subject: | Idle screw |
I need to raise the idle in my car but for the life of me can't find the idle screw. Setup is twin 1.5 inch SUs. A picture would be really helpful. Thanks |
|
| Author: | gtogreen1969 [ Tue Aug 02, 2016 6:09 pm ] |
| Post subject: | Re: Idle screw |
There is some info here. http://sucarb.co.uk/technical-hif-type- ... ning-multi You really need to make sure the throttle butterflies are at the same position and using the hose in the ear is a good way of checking. No5 is the idle adjusting screw but to do it properly the interconnecting levers need to be backed off before you start then readjusted correctly afterwards. 
|
|
| Author: | belldane [ Wed Aug 03, 2016 11:26 am ] |
| Post subject: | Re: Idle screw |
Thanks for that |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|