| ausmini https://ausmini.com/forums/ |
|
| Project Binky # 13 https://ausmini.com/forums/viewtopic.php?f=2&t=93228 |
Page 1 of 1 |
| Author: | 9YaTaH [ Sat Jul 23, 2016 2:26 pm ] |
| Post subject: | Project Binky # 13 |
https://www.youtube.com/watch?v=I_ajcKhHLjU |
|
| Author: | Davo111 [ Sat Jul 23, 2016 3:05 pm ] |
| Post subject: | Re: Project Binky # 13 |
How easy was that tank, yeah right. |
|
| Author: | 9YaTaH [ Sun Jul 24, 2016 10:37 am ] |
| Post subject: | Re: Project Binky # 13 |
Ohhhh dear...after all that work, the boys seem to be cutting corners  All the calcs to get a 50 litre tank and then they fit the filler tube 2-3 centimetres(?) low  To fill the tank they would need to have fuel in the rubber fuel filler hose...not ideal  Banding wheels is also not ideal (sick bird in Oz?)...they could have just sourced an alloy wheel with the correct offset (its only money!) 
|
|
| Author: | mickmini [ Sun Jul 24, 2016 11:46 am ] |
| Post subject: | Re: Project Binky # 13 |
9YaTaH wrote: Banding wheels is also not ideal (sick bird in Oz?)...they could have just sourced an alloy wheel with the correct offset (its only money!) He did say that they were just a trial fit - no word on what the final wheels will actually be. |
|
| Author: | Morbo28 [ Sun Jul 24, 2016 1:59 pm ] |
| Post subject: | Re: Project Binky # 13 |
Yeah he only banded the wheels to see if the dimensions work Sent from my Nexus 6P using Tapatalk |
|
| Author: | Harley [ Sun Jul 24, 2016 2:31 pm ] |
| Post subject: | Re: Project Binky # 13 |
In an earlier episode I believe he said he selected them because they look like a 13" version of a 10" cooper s wheel or something like that. Presumably if he continues with them and can't source a wheel with the correct offset he'd get a proper wheel widening place to do the rest? |
|
| Author: | 9YaTaH [ Sun Jul 24, 2016 2:43 pm ] |
| Post subject: | Re: Project Binky # 13 |
Yep. |
|
| Author: | Mokesta [ Sun Jul 24, 2016 7:41 pm ] |
| Post subject: | Re: Project Binky # 13 |
All the work they did for that tank! I made an alloy tank for the Moke that is very similar. Long, thin, 2 baffles, efi pump and level sender, return line etc. mine was about 42 litres. Nowhere near as pretty but does the job just as well. Ah the memories... |
|
| Author: | poeee [ Mon Jul 25, 2016 8:23 am ] |
| Post subject: | Re: Project Binky # 13 |
They extend the top of the tank a little to give an air gap. Don't you guys take notes?! 
|
|
| Author: | Hobson [ Mon Jul 25, 2016 8:50 am ] |
| Post subject: | Re: Project Binky # 13 |
poeee wrote: They extend the top of the tank a little to give an air gap. Don't you guys take notes?! And expansion room for those blistering hot UK days. |
|
| Author: | poeee [ Mon Jul 25, 2016 8:54 am ] |
| Post subject: | Re: Project Binky # 13 |
Hobson wrote: And expansion room for those blistering hot UK days. 
|
|
| Author: | Harley [ Mon Jul 25, 2016 10:19 am ] |
| Post subject: | Re: Project Binky # 13 |
Love the bit where he says he's making it from aluminium because thats what its called.
|
|
| Author: | 9YaTaH [ Sun Nov 27, 2016 7:50 pm ] |
| Post subject: | Re: Project Binky # 14 |
Underneath the Arches! https://www.youtube.com/watch?v=mB4NXA_ ... gest-vrecs |
|
| Author: | fuzzy-hair-man [ Sat Mar 18, 2017 5:31 pm ] |
| Post subject: | Re: Project Binky # 15 |
https://youtu.be/hViplB84We4 Number 15 is out, €¥*\¡! That bulkhead and firewall looks cramped. |
|
| Author: | 9YaTaH [ Mon Mar 20, 2017 12:48 pm ] |
| Post subject: | Re: Project Binky # 15 |
fuzzy-hair-man wrote: https://youtu.be/hViplB84We4 Number 15 is out, €¥*\¡! That bulkhead and firewall looks cramped. If there is a complicated and entertaining way to do something...they do it
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|