| ausmini https://ausmini.com/forums/ |
|
| A+ Camshaft https://ausmini.com/forums/viewtopic.php?f=2&t=93040 |
Page 1 of 1 |
| Author: | bluewhitecoopers1968 [ Sun Jul 03, 2016 12:59 am ] |
| Post subject: | A+ Camshaft |
Hi all, just a quick question, can an A+ Camshaft be used in an A series engine. Cheers. Sent from my SM-G900I using Tapatalk |
|
| Author: | drmini in aust [ Sun Jul 03, 2016 7:34 am ] |
| Post subject: | Re: A+ Camshaft |
Yes no problem, use with 1275A+ slot drive oil pump. Use 998A+ pump for small bore motors. |
|
| Author: | bluewhitecoopers1968 [ Mon Jul 11, 2016 1:33 am ] |
| Post subject: | Re: A+ Camshaft |
drmini in aust wrote: Yes no problem, use with 1275A+ slot drive oil pump. Use 998A+ pump for small bore motors. Is the dizzy gear on the A+ cam the same as the A Kevin, Guy here in the UK says there not interchangeable. He has a few std A plus wide lobe cams for 15 pounds each. Cheers Sent from my SM-G900I using Tapatalk |
|
| Author: | drmini in aust [ Mon Jul 11, 2016 6:41 am ] |
| Post subject: | Re: A+ Camshaft |
Drive gear on cam is the same. I recently put an A+ cam in a 998 A series, no problem. GR reground it to an RE266SS. I think all A+ cams are wide lobe/slot drive? Anyhow this one was. [edit] 15 quid is cheap, all wide lobe stock cams are getting scarce in Oz now. Bring a few in, they'll sell easy. 
|
|
| Author: | bluewhitecoopers1968 [ Mon Jul 11, 2016 7:10 pm ] |
| Post subject: | Re: A+ Camshaft |
Cheers Doc, I'll do that. Richard. Sent from my SM-G900I using Tapatalk |
|
| Author: | goodie [ Sun Sep 04, 2016 6:18 pm ] |
| Post subject: | Re: A+ Camshaft |
drmini in aust wrote: Drive gear on cam is the same. I recently put an A+ cam in a 998 A series, no problem. GR reground it to an RE266SS. I think all A+ cams are wide lobe/slot drive? Anyhow this one was. What are the benefits of running a wide lobe cam in a small bore engine, if any ? |
|
| Author: | drmini in aust [ Sun Sep 04, 2016 6:21 pm ] |
| Post subject: | Re: A+ Camshaft |
Probably a little less cam lobe wear. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|