An angle grinder key / tool makes a useful holding devide for the trunnion pin when loosening the bolt.
| ausmini https://ausmini.com/forums/ |
|
| Removing rear subframe mount https://ausmini.com/forums/viewtopic.php?f=2&t=92818 |
Page 1 of 1 |
| Author: | nefarious [ Sun Jun 05, 2016 2:00 pm ] |
| Post subject: | Removing rear subframe mount |
Hi, Dropped rear subframe from mini van today and went to remove subframe mounts. Discovered that the front mounts have what looks like a plug with 2 holes on end of the mount shaft and I have no idea how these can be remove to take off the mount. The shaft the mount sits on simply spins when I use molys and I don't have adjustable grinder spanner (not that I think that would help). Clearly I'm missing something, any help would be great ?? I can post picture if not clear in case this is model specific. The back mounts were nuts and easy to remove. Thanks in advance. |
|
| Author: | drmini in aust [ Sun Jun 05, 2016 2:33 pm ] |
| Post subject: | Re: Removing rear subframe mount |
The round thing is the head of a `mount pin', ie. it is a glorified bolt. There is a nut inside the subframe when you clear all the crud away. |
|
| Author: | Harley [ Sun Jun 05, 2016 7:35 pm ] |
| Post subject: | Re: Removing rear subframe mount |
An angle grinder key / tool makes a useful holding devide for the trunnion pin when loosening the bolt.
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|