| ausmini https://ausmini.com/forums/ |
|
| Tin Can Master Cylinder Rebuild kit https://ausmini.com/forums/viewtopic.php?f=2&t=92703 |
Page 1 of 1 |
| Author: | simonw [ Sun May 22, 2016 2:09 pm ] |
| Post subject: | Tin Can Master Cylinder Rebuild kit |
I can't seem to find a rebuild kit online for the single line tin can type master cylinder brake or clutch.. Any ideas? Also anybody that has the internals for the brake MC that would like to part with them please let me know .. I have two Cooper S bodies that need filling (honed and zinc plated ready to go) |
|
| Author: | captainwaldopepper [ Sun May 22, 2016 5:14 pm ] |
| Post subject: | Re: Tin Can Master Cylinder Rebuild kit |
Minisport SA has them Brake: http://minisport.com.au/mini-tin-can-br ... ld-kit-700 Clutch: http://minisport.com.au/clutch-master-c ... -no-groove Cheers Dave |
|
| Author: | gtogreen1969 [ Sun May 22, 2016 6:50 pm ] |
| Post subject: | Re: Tin Can Master Cylinder Rebuild kit |
If your cylinder body has a groove around it then you may need thè kit with 2 o-rings. No groove has 1 o-ring and 1 cup. Another thing to look for if your buying pistons for them. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|