Thanks for all your help guys have sourced a condenser for it
| ausmini https://ausmini.com/forums/ |
|
| Scorcher dissy parts needed https://ausmini.com/forums/viewtopic.php?f=2&t=92682 |
Page 1 of 1 |
| Author: | i got a mini [ Fri May 20, 2016 1:42 pm ] |
| Post subject: | Scorcher dissy parts needed |
That's what my dizzy has on the side of it. Have been told it might be out of a Nissan but wasn't sure. Has any one know what they are out of as I need a condenser for it. Will post pics of it later today. |
|
| Author: | 1071 S [ Fri May 20, 2016 5:37 pm ] |
| Post subject: | Re: Scorcher dissy parts needed |
Scorcher are (used to be???) a custom ignition shop.. in Melbourne when I last talked to them.... Mostly Holden/Fraud stuff but they fixed my Piranha system..... Cheers, Ian |
|
| Author: | i got a mini [ Fri May 20, 2016 6:44 pm ] |
| Post subject: | Re: Scorcher dissy parts needed |
Oh ok I just rang Waric Aguston and he spat out a part number over the phone made my job a lot easier thanks anyway lol |
|
| Author: | goodie [ Fri May 20, 2016 7:29 pm ] |
| Post subject: | Re: Scorcher dissy parts needed |
I remember being at the Muscle Car Masters quite a few years back and i was looking at dissy's in some of the mini's and noticed that a lot of them were using Scorcher Dissy's , so i asked one of the drivers about them and he told me that they use Nissan points , someone that is a part of the race mini fraternity might be able to shed some more light on the subject. |
|
| Author: | DavidE [ Fri May 20, 2016 7:57 pm ] |
| Post subject: | Re: Scorcher dissy parts needed |
i got a mini wrote: Oh ok I just rang Waric Aguston and he spat out a part number over the phone made my job a lot easier thanks anyway lol Warwick Augustin? |
|
| Author: | deluxe67 [ Fri May 20, 2016 9:26 pm ] |
| Post subject: | Re: Scorcher dissy parts needed |
GR told me he uses points in his race car! So they can't be as bad as people make out... |
|
| Author: | slide [ Sat May 21, 2016 12:29 pm ] |
| Post subject: | Re: Scorcher dissy parts needed |
My Scorcher is electronic and uses Bosch parts. Performance Ignition Services in Melbourne make them and have been for decades, so all parts should be readily available. |
|
| Author: | Morbo28 [ Sat May 21, 2016 2:31 pm ] |
| Post subject: | Scorcher dissy parts needed |
Yep when they make a Scorcher dizzy they use Bosch parts. I got a little card with the parts numbers used in the particular dizzy in case I ever need spares. |
|
| Author: | i got a mini [ Sun May 22, 2016 8:32 am ] |
| Post subject: | Re: Scorcher dissy parts needed |
Thanks for all your help guys have sourced a condenser for it
|
|
| Author: | HistoricRacingS [ Tue May 24, 2016 9:46 pm ] |
| Post subject: | Re: Scorcher dissy parts needed |
http://performanceignition.com.au/ is the website for the company that makes them. Just around the corner from Link Automotive. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|