Aussie Brian wrote:
Morris 1100 wrote:
I just use my fingers.
+1
Don't we all do everything on our minis with our fingers
At least I do
| ausmini https://ausmini.com/forums/ |
|
| SU Carb Main Jet Adjusting Spanner https://ausmini.com/forums/viewtopic.php?f=2&t=91655 |
Page 1 of 1 |
| Author: | GundyGuy [ Wed Jan 27, 2016 6:11 am ] |
| Post subject: | SU Carb Main Jet Adjusting Spanner |
Would anyone have a drawing of the small main jet spanner I have seen photos but cant tell just how big it is Will make one if i can find some measurements Thanks Marc |
|
| Author: | rapa59 [ Wed Jan 27, 2016 8:42 am ] |
| Post subject: | Re: SU Carb Main Jet Adjusting Spanner |
I just use a cut down 15mm spanner |
|
| Author: | timmy201 [ Wed Jan 27, 2016 9:03 am ] |
| Post subject: | Re: SU Carb Main Jet Adjusting Spanner |
You can buy the kit pretty cheap from SU Midel http://www.sumidel.com/shop/item/su-tool-kit |
|
| Author: | Morris 1100 [ Wed Jan 27, 2016 1:03 pm ] |
| Post subject: | Re: SU Carb Main Jet Adjusting Spanner |
I just use my fingers. |
|
| Author: | Aussie Brian [ Wed Jan 27, 2016 7:49 pm ] |
| Post subject: | Re: SU Carb Main Jet Adjusting Spanner |
Morris 1100 wrote: I just use my fingers. +1 |
|
| Author: | Mick [ Wed Jan 27, 2016 8:11 pm ] |
| Post subject: | Re: SU Carb Main Jet Adjusting Spanner |
Aussie Brian wrote: Morris 1100 wrote: I just use my fingers. +1 Its better when the manifolds are hot and the nut is stiff to turn. |
|
| Author: | Phil 850 [ Thu Jan 28, 2016 10:43 am ] |
| Post subject: | Re: SU Carb Main Jet Adjusting Spanner |
Aussie Brian wrote: Morris 1100 wrote: I just use my fingers. +1 Don't we all do everything on our minis with our fingers At least I do
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|