| ausmini https://ausmini.com/forums/ |
|
| Carb Spacer Required? https://ausmini.com/forums/viewtopic.php?f=2&t=91152 |
Page 1 of 1 |
| Author: | Thorlek [ Tue Dec 01, 2015 10:49 am ] |
| Post subject: | Carb Spacer Required? |
Hey All, Do you need to use a spacer between the manifold and the carby? (HS4) What is the purpose of them anyway? Thanks! |
|
| Author: | timmy201 [ Tue Dec 01, 2015 11:21 am ] |
| Post subject: | Re: Carb Spacer Required? |
I think the throttle cable brackets are designed to use them and might be at slightly the wrong angle without them? I think I have a spare alloy one if you are interested? |
|
| Author: | Thorlek [ Tue Dec 01, 2015 3:59 pm ] |
| Post subject: | Re: Carb Spacer Required? |
Righto, I guess I just need to do a test fit and see what happens. The only other issue I can see is the un-threaded section of the stud on the manifold might be too big without a spacer to take up some of the room. Thanks for the offer timmy, i'll let you know if I need it. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|