A few minutes on google and I found these (all OS).
Leacy Classics
Classic Motorsport
Mini Spares
| ausmini https://ausmini.com/forums/ |
|
| GTR102 Temp Sender https://ausmini.com/forums/viewtopic.php?f=2&t=87599 |
Page 1 of 1 |
| Author: | doc.martin [ Tue Oct 28, 2014 3:58 pm ] |
| Post subject: | GTR102 Temp Sender |
Can anyone tell me where (in Oz by preferences) I can buy a GTR 102 temp sender... Or equivalent? I can't seem to find one anywhere. Cheers Scott |
|
| Author: | wild_willy [ Wed Oct 29, 2014 1:33 pm ] |
| Post subject: | Re: GTR102 Temp Sender |
Not easy to find I'm afraid. I presume you want this for an early Cooper with a moving coil style temperatuture gauge. The later bi-metallic strip type gauge uses a differnet sender (GTR101?). Try looking for NOS GTR102 in Uk or other places on Ebay. It's how I found mine. Good Luck. |
|
| Author: | jb007 [ Wed Oct 29, 2014 2:36 pm ] |
| Post subject: | Re: GTR102 Temp Sender |
A few minutes on google and I found these (all OS). Leacy Classics Classic Motorsport Mini Spares |
|
| Author: | doc.martin [ Wed Oct 29, 2014 7:04 pm ] |
| Post subject: | Re: GTR102 Temp Sender |
Thanks for that.. I could only 1 but better than nothing. I haven't heard of Leacy before.. willy, did you ever source the heater for the 997 you were looking for? If you did I'd apreacate any photos you could send my way.. Both of the blower and heater if is not to much to ask. Cheers again for your help... Scott |
|
| Author: | Besser [ Fri Oct 31, 2014 8:50 am ] |
| Post subject: | Re: GTR102 Temp Sender |
These are the goto guys for that: https://plus.google.com/115056458497210 ... l=au&hl=en They can build or calibrate anything. |
|
| Author: | wild_willy [ Fri Oct 31, 2014 10:21 am ] |
| Post subject: | Re: GTR102 Temp Sender |
doc.martin wrote: Thanks for that.. I could only 1 but better than nothing. I haven't heard of Leacy before.. willy, did you ever source the heater for the 997 you were looking for? If you did I'd apreacate any photos you could send my way.. Both of the blower and heater if is not to much to ask. Cheers again for your help... Scott I had most of the heater bits except for the cold air intake flapper valve thingy. I was able to remanufacture one from a MG which was almost identical. All I need now is the heater control cable to match the NOS Ait control cable. Will send you some pics soon. Maybe PM me your email? |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|