Pleeeeease, someone say yes.
I spent ages trying to get the old ones off
What a bugger of a spot to get at, takes the biscuit for the most awkward spot on the little beast.
| ausmini https://ausmini.com/forums/ |
|
| Any tips / special tools for bonnet bulkhead hinge bolts https://ausmini.com/forums/viewtopic.php?f=2&t=86998 |
Page 1 of 1 |
| Author: | MiniBob [ Mon Aug 25, 2014 4:50 pm ] |
| Post subject: | Any tips / special tools for bonnet bulkhead hinge bolts |
Pleeeeease, someone say yes. I spent ages trying to get the old ones off What a bugger of a spot to get at, takes the biscuit for the most awkward spot on the little beast.
|
|
| Author: | kiwiinwgtn [ Mon Aug 25, 2014 5:23 pm ] |
| Post subject: | Re: Any tips / special tools for bonnet bulkhead hinge bolts |
I good quality slim line spanner and one ratchet spanner and some crc usually does the trick |
|
| Author: | MiniBob [ Mon Aug 25, 2014 5:33 pm ] |
| Post subject: | Re: Any tips / special tools for bonnet bulkhead hinge bolts |
Thats exactly what I did use, just such a sod of a spot to get at. |
|
| Author: | 1071 S [ Mon Aug 25, 2014 6:40 pm ] |
| Post subject: | Re: Any tips / special tools for bonnet bulkhead hinge bolts |
You didn't lose the little brass shims did you ? Cheers, Ian |
|
| Author: | MiniBob [ Tue Aug 26, 2014 10:32 am ] |
| Post subject: | Re: Any tips / special tools for bonnet bulkhead hinge bolts |
1071 S wrote: You didn't lose the little brass shims did you ? Cheers, Ian Thanks I'll double check, thought they were only fitted on older cars? Did find a very thin white plastic one but wasn't sure it was from the hinge mount. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|