ausmini https://ausmini.com/forums/ |
|
850 Original style door trim https://ausmini.com/forums/viewtopic.php?f=2&t=86962 |
Page 1 of 1 |
Author: | Boostedmini [ Thu Aug 21, 2014 4:35 pm ] |
Post subject: | 850 Original style door trim |
Hi all, Does anyone know if you can get original or close to original felt insulated backed vinyl as per the original 850's I have got some stuff on the engine bay side of the fire wall that i got from Bruce at MG Sports Parts at Thornleigh years ago, but it is quite glossy and i would like it in a mat like finish. I currently have door trims from Newton Commercial and they are board back vinyl like a deluxe/K/S door trim and i just dont like it that much. Grant |
Author: | niffty64 [ Thu Aug 21, 2014 4:42 pm ] |
Post subject: | Re: 850 Original style door trim |
hi Grant it would be good if you could send me some pictures of your door trims. As i am just about to purchase some from Newtons. thanks Gavin |
Author: | Boostedmini [ Fri Aug 22, 2014 7:28 am ] |
Post subject: | Re: 850 Original style door trim |
this is them http://www.newtoncomm.co.uk/cars/classic-mini/model-19/panels/522-mk1-mk2-mini-door-panels/ new do earlier grey fleck ones but they are all panels and not just the trimto glue to the inner of the door skin Grant |
Author: | AJ [ Fri Aug 22, 2014 7:35 pm ] |
Post subject: | Re: 850 Original style door trim |
Aussie 850 should have plain trim ,without the ribs, http://www.newtoncomm.co.uk/cars/classi ... or-panels/ |
Author: | niffty64 [ Fri Aug 22, 2014 8:20 pm ] |
Post subject: | Re: 850 Original style door trim |
Boostedmini wrote: this is them http://www.newtoncomm.co.uk/cars/classic-mini/model-19/panels/522-mk1-mk2-mini-door-panels/ new do earlier grey fleck ones but they are all panels and not just the trimto glue to the inner of the door skin Grant yeh I have just ordered those one. I was hoping you had photos of your car with them fitted |
Author: | Mick [ Fri Aug 22, 2014 8:22 pm ] |
Post subject: | Re: 850 Original style door trim |
AJ wrote: Aussie 850 should have plain trim ,without the ribs, http://www.newtoncomm.co.uk/cars/classi ... or-panels/ Were they still on cards or upholstered onto the inside of the outer panels? cheers Mick |
Author: | AJ [ Fri Aug 22, 2014 8:34 pm ] |
Post subject: | Re: 850 Original style door trim |
Mick wrote: AJ wrote: Aussie 850 should have plain trim ,without the ribs, http://www.newtoncomm.co.uk/cars/classi ... or-panels/ Were they still on cards or upholstered onto the inside of the outer panels? cheers Mick They didn't have door cards ,so the newton ones are not strictly correct, but the plain trim is . The hessian backing was just glued to the outer door skin and the trim material glued to the hessian |
Author: | Mick [ Fri Aug 22, 2014 8:36 pm ] |
Post subject: | Re: 850 Original style door trim |
AJ wrote: Mick wrote: AJ wrote: Aussie 850 should have plain trim ,without the ribs, http://www.newtoncomm.co.uk/cars/classi ... or-panels/ Were they still on cards or upholstered onto the inside of the outer panels? cheers Mick They did didn't have door cards ,so the newton ones are not strictly correct, but the plain trim is . The hessian backing was just glued to the outer door skin and the trim material glued to the hessian Ok, how about the rear, was it the same, and how was it edged ? I'll have to get my hands on a couple of pieces I think! Thanks! |
Author: | niffty64 [ Fri Aug 22, 2014 8:43 pm ] |
Post subject: | Re: 850 Original style door trim |
my 850 had stitched blue trim in the rear and glue hension backed black vinyl in the front. I liked the look of the stitched front door trims from Newtons. I will soon see what it is like when it arrives ![]() |
Author: | 1071 S [ Sat Aug 23, 2014 10:06 am ] |
Post subject: | Re: 850 Original style door trim |
Because the rears are common across all Oz minis your stitched rear sections probably came from a later car. There were no later stitched panels that suited 850 doors so the POs just stuck with the originals. UK front and rear panels weren't "stitched" rather the lines were formed by frequency welding... That's what you are looking at in the Newton ads. Cheers, Ian |
Author: | AJ [ Sat Aug 23, 2014 11:01 am ] |
Post subject: | Re: 850 Original style door trim |
[/quote]They did didn't have door cards ,so the newton ones are not strictly correct, but the plain trim is . The hessian backing was just glued to the outer door skin and the trim material glued to the hessian![/quote] [/quote]Ok, how about the rear, was it the same, and how was it edged ? I'll have to get my hands on a couple of pieces I think! Thanks![/quote] Rear trims are same as front ,hessian backed glued in place |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |