Ausmini
It is currently Sun Jun 22, 2025 5:08 pm

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Print view Previous topic | Next topic 
Author Message
MiNi MuLiShA
 Post subject: Rod-Change Leakage...
PostPosted: Wed Mar 17, 2004 3:01 pm 
Offline
1098cc
1098cc
User avatar

Joined: Tue Mar 16, 2004 9:57 am
Posts: 1629
Location: Country Victoria
G'day..


Just wondering what the fix for a leaking selector Rod in a rodchange box is??

i know there are kits you can buy.. but do they really work?

What exactly is involved?

What are your opinions as to what i should do, its not pis-isting out...but im thinking i might get harrassed in the roadworthy...

ideas fellas n ladies?

-Cam

_________________
Image

IS NOW BACK ONLINE AFTER SOMETIME..... SORRY TO ALL, FOR NOT REPLYING TO PM'S!!
Top
 Profile  
 
poeee
 Post subject:
PostPosted: Wed Mar 17, 2004 3:12 pm 
Offline
1360cc
1360cc
User avatar

Joined: Tue Mar 16, 2004 8:55 am
Posts: 11264
Location: Geelong, Victoria
For the roadworthy, our local mechanic told us to make sure the engine and that is clean. It may be leaky, but he said that aslong as it's clean, they don't care.

_________________
Image
Top
 Profile  
 
MiNi MuLiShA
 Post subject:
PostPosted: Wed Mar 17, 2004 3:28 pm 
Offline
1098cc
1098cc
User avatar

Joined: Tue Mar 16, 2004 9:57 am
Posts: 1629
Location: Country Victoria
yeah yeah I know that... its just i dont want a stinky leakey mini

is that possible?? i dont think so :P

seriously... any hints?


-Cam :P

_________________
Image

IS NOW BACK ONLINE AFTER SOMETIME..... SORRY TO ALL, FOR NOT REPLYING TO PM'S!!
Top
 Profile  
 
min13k
 Post subject:
PostPosted: Wed Mar 17, 2004 4:51 pm 
Offline
I DWIVE A BIG TWUCK
I DWIVE A BIG TWUCK
User avatar

Joined: Tue Mar 16, 2004 5:17 pm
Posts: 8732
i seen on a pommie forum that they use these repair kit to a varieing degree of sucess it is a rubber and a felt grommity fing i fink .... ouch that hurt
makka
Top
 Profile  
 
excops
 Post subject:
PostPosted: Thu Mar 18, 2004 11:10 pm 
Offline
848cc
848cc
User avatar

Joined: Thu Mar 18, 2004 11:08 pm
Posts: 64
Location: Sydney Australia !
Just wack the new seal in over the old one!
Usually does the trick !
Ben
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Fri Mar 19, 2004 8:22 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39750
Location: near Baulkham Hills, NSW
I'm with Ben- done that lots of times! 8)

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
MiNi MuLiShA
 Post subject:
PostPosted: Fri Mar 19, 2004 8:57 pm 
Offline
1098cc
1098cc
User avatar

Joined: Tue Mar 16, 2004 9:57 am
Posts: 1629
Location: Country Victoria
Ahhh ok, yeah I've herd that too..... now.. I haven't checked the prices yet.. but whats the guestimation on price for one of these kits??

and whats involved in fitting the kit??

Thanx Guys for ya info!

-Cam

_________________
Image

IS NOW BACK ONLINE AFTER SOMETIME..... SORRY TO ALL, FOR NOT REPLYING TO PM'S!!
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Fri Mar 19, 2004 9:11 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39750
Location: near Baulkham Hills, NSW
Kit's not listed at Karcraft- oil seal is $3.74. :wink: Buy 2, fit 'em both.. :P

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Anto
 Post subject:
PostPosted: Mon Mar 22, 2004 9:06 am 
Offline
1275cc
1275cc
User avatar

Joined: Tue Mar 16, 2004 10:34 am
Posts: 2067
Location: Canberra
I installed one of these kits when I put a rod box in my car. I haven't noticed any oil leaks from it yet, so I assume it works. The old trick used to be use two seals, and this will work just as well, but as I understand it the proper kit will last longer aswell.
From memory the kit wasn't very expensive, only a little bit more than the normal rubbers.

Anto.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: Bing [Bot] and 85 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.