Is the body good? The car runs ok? Please don't wreck another 1100 just for a 1275
There are precious few running examples now! Just get an A+ donk, and it will be newer to boot...
Cheers
Jacob
| ausmini https://ausmini.com/forums/ |
|
| Value of 1100s motor https://ausmini.com/forums/viewtopic.php?f=2&t=68383 |
Page 1 of 2 |
| Author: | 76van [ Sat Jan 22, 2011 8:25 am ] |
| Post subject: | Value of 1100s motor |
may have found a replacement motor for my van. just wondering what a good running 1100s motor is worth ? cheers jayson |
|
| Author: | ryan [ Sat Jan 22, 2011 10:39 am ] |
| Post subject: | |
How long is a piece of string. The cost will vary greatly depending on how the motor has been built. You have to consider - Head- what is it? whats been done to it? - Cam- what is it? - Gearbox- is it good? What is it? 3 syncro, 4syncro, rod or remote? - How long ago was the motor built? When was it last run? - Who built it? What parts did they use? The cost of a decent 1275 motor in good running condition is about $3000 I had my motor rebuilt including the box for a tad over $4000, that does not include purchasing the motor and box in the first place. And its a fairly mild motor. So to answer your question. Anywhere between $1000 and $10000. Ryan |
|
| Author: | Super-mini [ Sat Jan 22, 2011 11:20 am ] |
| Post subject: | |
2 or 3k i reckon. |
|
| Author: | 850man [ Sat Jan 22, 2011 11:46 am ] |
| Post subject: | |
The last complete 1100S motor I purchased was on ebay and I paid $450 for it. They are not as rare and valable as everyone makes out them to be. Complete A+ 1275s are still available from various importers, they sell for around $1000/$1200 depending on how greedy the seller is. |
|
| Author: | NG [ Sat Jan 22, 2011 12:05 pm ] |
| Post subject: | |
rebuilder A+ $1000 to $1300 talk to josh. i think running about 1500 to 1800. A+ maybe $2,500 dunno at a guess. |
|
| Author: | 76van [ Sat Jan 22, 2011 12:49 pm ] |
| Post subject: | |
thanks for all the replies.going to have a look & drive of the car tomorrow. cheers jayson |
|
| Author: | Kennomini [ Sat Jan 22, 2011 12:52 pm ] |
| Post subject: | |
I paid $1400 for a running in the car donk. I took it for a test drive before I pulled it out and it is a decent motor. It has a KAD quick shift, twin carbies, Gemini starter, pulsar dizzy and a few other goodies. I thought it was a very good deal at that price so I grabbed it. I'd say any 1275cc donk on a rear box in half decent condition is worth around 1k, something ready to bolt in and run would be around 2-3k. If it has some really good stuff on it or it's over bored and making decent power that could be up to 5k and more. |
|
| Author: | 76van [ Sat Jan 22, 2011 1:29 pm ] |
| Post subject: | |
what carby did these come out with from the factory ? |
|
| Author: | drmini in aust [ Sat Jan 22, 2011 1:44 pm ] |
| Post subject: | |
76van wrote: what carby did these come out with from the factory ?
1100S had a single HS4. Same manifold as the late 998 Clubby or 1275LS. |
|
| Author: | VulcanBB18 [ Sat Jan 22, 2011 4:17 pm ] |
| Post subject: | |
Is the body good? The car runs ok? Please don't wreck another 1100 just for a 1275
There are precious few running examples now! Just get an A+ donk, and it will be newer to boot... Cheers Jacob |
|
| Author: | poeee [ Sat Jan 22, 2011 9:33 pm ] |
| Post subject: | |
drmini in aust wrote: 76van wrote: what carby did these come out with from the factory ? 1100S had a single HS4. Same manifold as the late 998 Clubby or 1275LS. Didn't the 1275 LS have a different manifold? I wouldn't know, mine come with twins and LCB's... |
|
| Author: | drmini in aust [ Sat Jan 22, 2011 10:05 pm ] |
| Post subject: | |
I've got a couple of 1275LS at work, the manifolds look the same to me. One has had an HIF44 bolted onto the manifold with the 2 original studs only. A+ motors from 198? on in UK got a different one, with an HIF44 carb. |
|
| Author: | 850man [ Sat Jan 22, 2011 10:25 pm ] |
| Post subject: | |
1275 LS & 1275 Moke manifolds had a larger exhaust outlet, pipe & clamp. |
|
| Author: | superSeven [ Sun Jan 23, 2011 1:00 am ] |
| Post subject: | |
ryan wrote: The cost of a decent 1275 motor in good running condition is about $3000
looking at ebay this seems to be about right. But who knows if they sell or not? I never get the time to watch the auctions till they end. But that said, I got a whole running, close to roadworthy car with 1100S motor for $3500. |
|
| Author: | GT mowog [ Sun Jan 23, 2011 3:28 am ] |
| Post subject: | |
I generally pay anything between $400 to maybe $1000 (at a stretch). |
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|