Not sure. I think they are cheap if you are restoring a Cooper S but dear if you are just after a light for a Deluxe.
| ausmini https://ausmini.com/forums/ |
|
| MK1 Interior light repro? https://ausmini.com/forums/viewtopic.php?f=2&t=66372 |
Page 1 of 2 |
| Author: | SuperCooper [ Sun Oct 17, 2010 8:01 pm ] |
| Post subject: | MK1 Interior light repro? |
Where can you get a repro Mk1 interior light , curved lens type, in Oz? |
|
| Author: | Morris 1100 [ Sun Oct 17, 2010 8:02 pm ] |
| Post subject: | |
Mini King has them. |
|
| Author: | SuperCooper [ Sun Oct 17, 2010 8:05 pm ] |
| Post subject: | |
Cheers, any rough idea on $$$ ? |
|
| Author: | Morris 1100 [ Sun Oct 17, 2010 8:07 pm ] |
| Post subject: | |
Not sure. I think they are cheap if you are restoring a Cooper S but dear if you are just after a light for a Deluxe.
|
|
| Author: | drmini in aust [ Sun Oct 17, 2010 8:09 pm ] |
| Post subject: | |
$40 or so I think. I bought one off John a while back when they came in. |
|
| Author: | Hanra [ Sun Oct 17, 2010 8:13 pm ] |
| Post subject: | |
Morris 1100 wrote: Not sure. I think they are cheap if you are restoring a Cooper S but dear if you are just after a light for a Deluxe.
|
|
| Author: | SuperCooper [ Sun Oct 17, 2010 8:25 pm ] |
| Post subject: | |
Its for a MKII S so yeah its cheap....ha ha , but not so cheap when you have a few cars on the go! An eternal list of parts going through my brain! |
|
| Author: | simon k [ Sun Oct 17, 2010 8:28 pm ] |
| Post subject: | |
SuperCooper wrote: Its for a MKII S so yeah its cheap....ha ha , but not so cheap when you have a few cars on the go! An eternal list of parts going through my brain!
make sure it's the right one...... it's not the right one for my MK2 - the repro has the sliding switch, I need the toggle 
|
|
| Author: | SuperCooper [ Sun Oct 17, 2010 8:34 pm ] |
| Post subject: | |
Yes my original has a toggle switch , but am happy if its: not crumbling . looks similar and works! Unless you can point me to a toggle switch one? Thanks. |
|
| Author: | drmini in aust [ Sun Oct 17, 2010 8:38 pm ] |
| Post subject: | |
These are a pretty good repro, all the important bits are copper or brass. John's p/no is HH0001. |
|
| Author: | simon k [ Mon Oct 18, 2010 8:38 am ] |
| Post subject: | |
SuperCooper wrote: Unless you can point me to a toggle switch one?
I wish.... I live in hope that I'll find a non-crumbly or new old stock toggle one, copy it and make a squillion dollars off it... it might happen |
|
| Author: | 66S [ Mon Oct 18, 2010 8:52 am ] |
| Post subject: | |
Simon, What part is crumbling? I have a spare toggle or two in good condition but I don't think I have a spare base in good condition. Sometimes, only the toggle is needed. Regards Al |
|
| Author: | Mick [ Mon Oct 18, 2010 9:05 am ] |
| Post subject: | |
simon k wrote: SuperCooper wrote: Unless you can point me to a toggle switch one? I wish.... I live in hope that I'll find a non-crumbly or new old stock toggle one, copy it and make a squillion dollars off it... it might happen Four popped up on Ebay a couple of years ago. I got to know the guy and he kindly sold me one for a nice price. The rest went for a million dollars each.. Sorry, they're a bit fuzzy..but its a bit dark in the garage.. 
|
|
| Author: | Lillee [ Mon Oct 18, 2010 9:23 am ] |
| Post subject: | |
http://www.minis.com.au/minis/catalog/p ... ts_id=1062 |
|
| Author: | BBY755 [ Mon Oct 18, 2010 4:02 pm ] |
| Post subject: | |
Would have thought that to reproduce the toggle type wouldn't be much more difficult than the slide version. Maybe someone will one day soon........? |
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|