| ausmini https://ausmini.com/forums/ |
|
| T04 turbo, https://ausmini.com/forums/viewtopic.php?f=2&t=32411 |
Page 1 of 1 |
| Author: | clubmn [ Sat Jun 02, 2007 10:05 pm ] |
| Post subject: | T04 turbo, |
Is this 2 big for a mini? |
|
| Author: | MiniMe87 [ Sat Jun 02, 2007 10:12 pm ] |
| Post subject: | |
i dont no much about turbos in mini, but i would imagine that it would be a bitch to fit on of those in! |
|
| Author: | awdmoke [ Mon Jun 04, 2007 8:35 pm ] |
| Post subject: | |
Maybe on a well prepped 1275, but I think it would be a bit too laggy. Might be better with something a tad smaller. I have a TD04L sitting next to me now, but it is going on a G13b as they rev a lot higher & can cope with this size turbo better than an A series |
|
| Author: | DOZ [ Mon Jun 04, 2007 8:42 pm ] |
| Post subject: | |
Short answer would be too big for anything. Without knowing the trim and A/R ratio for turbine/compressor the number is useless. Is it a T04 off a truck or off a car? Daniel |
|
| Author: | slinkey inc [ Mon Jun 04, 2007 8:45 pm ] |
| Post subject: | |
I gave it a quick google, people are using them on old supras, and twin setups on late model RX7s. I'd say it's too big, for one on ebay it said this.... Quote: 64 Trim 0.96 A/R
Don't know really what all that means, but if that's what they all are, someone might be able to tell you if it's too big. |
|
| Author: | clubmn [ Mon Jun 04, 2007 9:38 pm ] |
| Post subject: | mm1275 |
What are they worth? I might try it if it is classified as reasonable price? |
|
| Author: | xplosion77 [ Mon Jun 04, 2007 9:47 pm ] |
| Post subject: | |
i think the metro turbo mini's had a t3 turbo on them and they are still pretty big i recon |
|
| Author: | mason [ Tue Jun 05, 2007 7:19 pm ] |
| Post subject: | |
Yep too big for a mini go for a mitsubishi TDO4 off a GSR Lancer or a GTO/3000GT twin turbo setup just the one is needed off that setup of course |
|
| Author: | DOZ [ Wed Jun 06, 2007 8:31 pm ] |
| Post subject: | |
T3 on metro has a 0.25 A/R on the turbine. Low A/R on turbine means less lag. The centre housing is the same on all T3, it's the turbine and compressor housing/s that determine the power etc. Daniel |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|