| ausmini https://ausmini.com/forums/ |
|
| hydro suspension query https://ausmini.com/forums/viewtopic.php?f=2&t=27859 |
Page 1 of 1 |
| Author: | >Rude< [ Fri Feb 09, 2007 12:34 pm ] |
| Post subject: | hydro suspension query |
hey all, Whilst adjusting my brakes today i noticed my suspension had a hole in it, or what looks to be the suspension or a cover???? is this the hydro bag or jus a cover??? (sorry couldnt find the digi, had to use mob) its only soft so i hope its only a cover 
cheers >Rude< |
|
| Author: | Timbo [ Fri Feb 09, 2007 12:48 pm ] |
| Post subject: | |
Its only a cover. I don't know if you can get a replacement, so I wouldn't worry about it too much. Tim |
|
| Author: | AEG163job [ Fri Feb 09, 2007 12:56 pm ] |
| Post subject: | |
And a real PITA to change. Let sleeping dogs lie 
|
|
| Author: | >Rude< [ Fri Feb 09, 2007 12:57 pm ] |
| Post subject: | |
phew!!  coz it was the same on the other side
thanks |
|
| Author: | Lillee [ Fri Feb 09, 2007 1:35 pm ] |
| Post subject: | |
That's considered good condition 
|
|
| Author: | Mick [ Fri Feb 09, 2007 1:43 pm ] |
| Post subject: | |
They are easily available new, you just need and excuse to release the pressure in the system, remove the top ball joint and replace by sliding over! I know of at least one guy who does without them completely so he can see if the knuckle joints are in place correctly in the hydro bags. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|