| ausmini https://ausmini.com/forums/ |
|
| usful tools https://ausmini.com/forums/viewtopic.php?f=2&t=23979 |
Page 1 of 2 |
| Author: | I_AM_THE_WAHL [ Mon Oct 23, 2006 9:05 pm ] |
| Post subject: | usful tools |
I just thought it might be interesting to find out what usful tools people have come across in there travels when it come to working on there car. i bought this the other day an it would have to be the best ball joint seperator i own 
no hammers needed and no damaged threads would have to be the first time i have removed a ball joint in under a minute Peter. |
|
| Author: | willy [ Mon Oct 23, 2006 9:09 pm ] |
| Post subject: | |
I am a useful tool. |
|
| Author: | Harley [ Mon Oct 23, 2006 9:18 pm ] |
| Post subject: | |
My most useful tool is my suzuki. It allows me to go out and buy all the rediculous one-off job tools minis require. Like the other day, I spent 2 hours driving round to find some sort of tool I could use to tighten the ball joints. Best thing I found was a big ass spanner, (1.5 inch) which would've cost $80 had I decided to buy it. (not best fit anyway) In the end I used a shifter and pipe. 
|
|
| Author: | LS1380 [ Mon Oct 23, 2006 10:06 pm ] |
| Post subject: | |
willy wrote: I am a useful tool.
Open-ender or a shifter 
|
|
| Author: | Harley [ Mon Oct 23, 2006 10:11 pm ] |
| Post subject: | |
Socket head.
|
|
| Author: | kiwiinwgtn [ Tue Oct 24, 2006 7:45 pm ] |
| Post subject: | |
HI Peter Where did you get the ball joint splitter, looks like a very good design Cheers B |
|
| Author: | gafmo [ Tue Oct 24, 2006 10:03 pm ] |
| Post subject: | |
Yep I want o know also..great thead.. Bugger now I have to take some pic's 
|
|
| Author: | I_AM_THE_WAHL [ Tue Oct 24, 2006 10:14 pm ] |
| Post subject: | |
i got this through work i fix power tools all day and i get to look at some rather nasty tool catalog now if only i had the space and the budget... Peter. |
|
| Author: | gafmo [ Tue Oct 24, 2006 10:17 pm ] |
| Post subject: | |
So $$ |
|
| Author: | I_AM_THE_WAHL [ Tue Oct 24, 2006 10:39 pm ] |
| Post subject: | |
i will double check with the boss tomorow but i think its around the $30.00 mark may be able to do a deal for ausmini members Peter. |
|
| Author: | Gadgets mini [ Wed Oct 25, 2006 6:24 am ] |
| Post subject: | |
gafmo wrote: Yep I want o know also..great thead..
Bugger now I have to take some pic's waiting for a pic of Gafs Thongs 
|
|
| Author: | minicranks [ Wed Oct 25, 2006 8:03 am ] |
| Post subject: | |
that is cheap for a decent ball joint splitter. keep us informed. |
|
| Author: | simon k [ Wed Oct 25, 2006 12:59 pm ] |
| Post subject: | |
I_AM_THE_WAHL wrote: i will double check with the boss tomorow but i think its around the $30.00 mark
may be able to do a deal for ausmini members Peter. put me down for one - I've been looking for a decent splitter like that |
|
| Author: | Mick [ Wed Oct 25, 2006 1:46 pm ] |
| Post subject: | |
I similar ball joint splitter is available at Supercrap. It's not as elegant as that one though and hasn't got the extended handle. It's for sale at about 30 bucks as well and like this one removes knuckles in about 30 seconds everytime. Great tool even if you buy it to use only once or twice. |
|
| Author: | Rikki [ Wed Oct 25, 2006 8:25 pm ] |
| Post subject: | |
Peter.[/quote] put me down for one - I've been looking for a decent splitter like that[/quote] Goto Repco, got mine from there only $22. Cheers |
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|