RE-13 cam is noisier than stock, as the opening/closing is sharper, like many true performance cams. Get used to it....
Put a Weber/Dellorto on then you won't hear it... 
| ausmini https://ausmini.com/forums/ |
|
| noisy rockers https://ausmini.com/forums/viewtopic.php?f=2&t=10430 |
Page 1 of 2 |
| Author: | J_A_M [ Tue Aug 23, 2005 10:18 pm ] |
| Post subject: | noisy rockers |
What causes noisy rockers? Incorrect adjustment, or wear, or both, or none? |
|
| Author: | drmini in aust [ Tue Aug 23, 2005 10:28 pm ] |
| Post subject: | |
RE-13 cam is noisier than stock, as the opening/closing is sharper, like many true performance cams. Get used to it....
Put a Weber/Dellorto on then you won't hear it...
|
|
| Author: | gafmo [ Tue Aug 23, 2005 10:29 pm ] |
| Post subject: | |
I also find Morris's noisey...but his is open to 19thou still |
|
| Author: | drmini in aust [ Tue Aug 23, 2005 10:32 pm ] |
| Post subject: | |
gafmo wrote: I also find Morris's noisey...but his is open to 19thou still
Set them to .016" unless you have 1.5 rockers on it.
|
|
| Author: | J_A_M [ Tue Aug 23, 2005 10:37 pm ] |
| Post subject: | |
I redid mine to 0.016" tonight. |
|
| Author: | gafmo [ Tue Aug 23, 2005 10:40 pm ] |
| Post subject: | |
Yer I know Kev..I just havent gotten around to it yet...but it will be interesting to see how he goes then..... Anton was it that noisey before and what were they set at prior |
|
| Author: | J_A_M [ Tue Aug 23, 2005 10:49 pm ] |
| Post subject: | |
the good Doc set them last time, prolly to .016 or .017 I retorqued the head tonight, and they were out a bit. Yes, I find them VERY noisy and it pisses me off! I am contemplating changing rockers..... I did fit an alloy rocker cover tonight too....that might help. Haven't road tested yet though...... |
|
| Author: | drmini in aust [ Tue Aug 23, 2005 10:52 pm ] |
| Post subject: | |
J_A_M wrote: the good Doc set them last time, prolly to .016 or .017
I retorqued the head tonight, and they were out a bit. Yes, I find them VERY noisy and it pisses me off! I am contemplating changing rockers..... I did fit an alloy rocker cover tonight too....that might help. Haven't road tested yet though...... What rockers do you have, I think they were the pressed metal ones (good) and didn't fell too sloppy on the shafts when I did them. Yes an alloy cover does help. Or you can go back to a stocko cam and lose all that urge...
|
|
| Author: | gafmo [ Tue Aug 23, 2005 10:53 pm ] |
| Post subject: | |
I say you have hit the nail on the head thier...new rocker cover...well maybe...I'v always had an alloy cover |
|
| Author: | J_A_M [ Tue Aug 23, 2005 11:13 pm ] |
| Post subject: | |
drmini in aust wrote: Or you can go back to a stocko cam and lose all that urge...
OMG!! I can't believe you said that!!!! 
|
|
| Author: | drmini in aust [ Tue Aug 23, 2005 11:17 pm ] |
| Post subject: | |
Just wondered how much you really hate the noise. I see I hit the intended nerve. 
|
|
| Author: | gafmo [ Tue Aug 23, 2005 11:23 pm ] |
| Post subject: | |
A little noice...or no go go...what do you want
|
|
| Author: | J_A_M [ Tue Aug 23, 2005 11:31 pm ] |
| Post subject: | |
noise is good....noise is good....
|
|
| Author: | gafmo [ Wed Aug 24, 2005 12:05 am ] |
| Post subject: | |
Enjoy then...
|
|
| Author: | Lillee [ Wed Aug 24, 2005 12:43 am ] |
| Post subject: | |
Pffft noise, what are you some granny trying to listen to John Laws in the morning on the way to lawn bowls?? 
Do as the doc says, toss out those twins and whack in a dellorto. You know you want to
|
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|