| ausmini https://ausmini.com/forums/ |
|
| Part name https://ausmini.com/forums/viewtopic.php?f=2&t=102534 |
Page 1 of 1 |
| Author: | Anzac00 [ Sun May 04, 2025 1:39 pm ] |
| Post subject: | Part name |
Hi All. I’m chasing the name of the cover used to fill the large rear hole behind the rear seat. I’m not having much luck searching for a replacement without the correct name. All advice gratefully received. |
|
| Author: | timmy201 [ Sun May 04, 2025 2:19 pm ] |
| Post subject: | Re: Part name |
The original piece was part 14A4476 and made from compressed fibre board/masonite/cardboard and held in place with self tapping screws into speed clips. I can't find anywhere that sells them, so you may need to make it yourself Some more details here: viewtopic.php?f=2&t=90876&p=986913&hilit=14A4476#p986913 |
|
| Author: | Anzac00 [ Sun May 04, 2025 6:20 pm ] |
| Post subject: | Re: Part name |
timmy201 wrote: The original piece was part 14A4476 and made from compressed fibre board/masonite/cardboard and held in place with self tapping screws into speed clips. I can't find anywhere that sells them, so you may need to make it yourself Some more details here: viewtopic.php?f=2&t=90876&p=986913&hilit=14A4476#p986913 Thanks so much. I’ve kept the old one but it looks a little second hand. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|