Could anybody help in re guards to the seal/gasket that is used on the Australian Mini Clubman fresh air system and seals the large fresh air scoop to the righthand inner guard under the bonnet - which the hose then runs under the guard. Any information would be much appreciated.

There was another thread about this a while back. Mine dont have them and I am not sure what a seal actuallybdoes anyway as mine work fine without them.

_________________
Cheers Dave.

We've had quite a few clubbies pass through the family, the plastic Z bend just clips in there with no seal.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

I can help you there. This seal, HYB3979 (Australian manufacture) is rectangular section 0.31 x 0.5" made from closed cell sponge rubber with a neoprene skin (probably much like a boot lid seal material). Described as "Seal - Nozzle - Air Intake Heater. Regards Tony

Thanks to everybody who has replied so far

Tony thanks for your detailed description of the seal. That will give me some thing to go by and work on. Very much appreciated.

I guess there's not much chance of finding one.

I will have a look over the weekend for you. Pretty sure I have one or two

_________________
1963 Morris 850 Smoke Grey
1963 Morris 850 Shadow Blue
1965 Morris Mini Smooth Van
1966 Morris Mini Van
1969 Morris Mini Deluxe Resto
5/72 Clubman Gt

Link Automotive in Melbourne have a few of them.

_________________
Have a Nice Day.
If already having a nice day please disregard.

Scoop, Thanks for your reply. I would really appreciate that if you do manage to come across a seal and I'm happy to cover costs.

Thank you also 850man. I'll see how Scoop gets on with his search in the weekend. Thanks everybody.

Here you go all those who have never seen one before.

_________________
Have a Nice Day.
If already having a nice day please disregard.

Thanks 850man. Great photo's. Much appreciated.