| ausmini https://ausmini.com/forums/ |
|
| Porting a head https://ausmini.com/forums/viewtopic.php?f=2&t=102153 |
Page 1 of 1 |
| Author: | Booglie [ Tue Feb 06, 2024 7:30 am ] |
| Post subject: | Porting a head |
Hi, i'm going to purchase an alloy head for a turbo 1330 with a garret GT13, is it worth getting bigger valves and mild port work or will the standard head do? |
|
| Author: | simon k [ Tue Feb 06, 2024 11:32 am ] |
| Post subject: | Re: Porting a head |
I'd say "yes", maybe look at what they say on turbominis forum? Also, alloy 5 port or 7 port? I'm not sure I see the point in an alloy 5 port.. |
|
| Author: | Booglie [ Tue Feb 06, 2024 11:53 am ] |
| Post subject: | Re: Porting a head |
I'll most likely go a 5 port to keep things simple and stay within budget, finding a good original one costs about the same. Is there much gain to be had with a 7 port? |
|
| Author: | simon k [ Thu Feb 08, 2024 8:06 pm ] |
| Post subject: | Re: Porting a head |
Booglie wrote: I'll most likely go a 5 port to keep things simple and stay within budget, finding a good original one costs about the same. Is there much gain to be had with a 7 port? oodles!! a decent amount of space behind the engine for your turbo, simpler plumbing for your intercooler, plus you can fuel it properly - port injection viewtopic.php?f=5&t=40966&hilit=998+turbo |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|