| ausmini https://ausmini.com/forums/ |
|
| WIRING PATHWAY https://ausmini.com/forums/viewtopic.php?f=2&t=102096 |
Page 1 of 1 |
| Author: | cooperess [ Tue Dec 12, 2023 4:12 pm ] |
| Post subject: | WIRING PATHWAY |
Attachment: Mini Vinwiring Loom DSCF1364.JPG As seen in the photo, there are 2 holes on either side of the central wiring hole.Are these holes used for wiring and if so what wires are fed though each of the extra holes? This question is for me rewiring my car following my wiring heat problem which I have yet to solve. |
|
| Author: | DavidE [ Tue Dec 12, 2023 4:22 pm ] |
| Post subject: | Re: WIRING PATHWAY |
What is your car? By model and year. |
|
| Author: | slacko [ Tue Dec 12, 2023 4:30 pm ] |
| Post subject: | Re: WIRING PATHWAY |
They are access holes for a screwdriver from under the parcel shelf to screw the speedo binicall to the bulkhead , not for wiring |
|
| Author: | cooperess [ Tue Dec 12, 2023 5:07 pm ] |
| Post subject: | Re: WIRING PATHWAY |
DavidE wrote: What is your car? By model and year. Mk2 1969
|
|
| Author: | Steam [ Tue Dec 12, 2023 5:51 pm ] |
| Post subject: | Re: WIRING PATHWAY |
Cannot help with the holes but if that is the speedo wiring then with the lamp out of the blue white lampholder then the continuity that you measured on the headlight wire should now be gone. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|