| ausmini https://ausmini.com/forums/ |
|
| Heater tap https://ausmini.com/forums/viewtopic.php?f=2&t=101929 |
Page 1 of 1 |
| Author: | carter [ Sat Jul 08, 2023 4:36 pm ] |
| Post subject: | Heater tap |
Has anyone ever had the issue of a heater tap actually falling apart? Mine is new but purchased some time ago. I went to readjust the heater cable and the whole tap fell apart. How are they actually fixed in place so this doesn't happen ? |
|
| Author: | Goldbrocade_62 [ Sat Jul 08, 2023 8:07 pm ] |
| Post subject: | Re: Heater tap |
There was alot of problems with them falling apart not sure if still the case |
|
| Author: | carter [ Sat Jul 08, 2023 9:00 pm ] |
| Post subject: | Re: Heater tap |
is there anyway to fix it? or a new one is in need |
|
| Author: | 68+86auto [ Sat Jul 08, 2023 10:25 pm ] |
| Post subject: | Re: Heater tap |
The type on the head? I have read about them failing (years ago now). I had one from minisport UK start leaking and I replaced it with a minispares one and haven't had an issue so far. |
|
| Author: | carter [ Mon Jul 10, 2023 4:24 pm ] |
| Post subject: | Re: Heater tap |
Yeah the one on the head for a cooper s. I was just about to drive it out of town but it needed adjusting so I 3ent to do that and it literally fell apart. I can't remember where I bought it as I'd buy bulk parts during my resto but they wouldn't be fitted or used for quite a while. |
|
| Author: | TDS76 [ Tue Jul 11, 2023 6:58 am ] |
| Post subject: | Re: Heater tap |
I have had the Minispares heater valve (ADU9102) for 4 years and no issues so far. Around the time I bought mine there was a lot of chatter on the forums about them falling apart and that the Minispares one was the best of the then current lot, but there was still a strong preference for NOS. Cheers, Paul. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|