| ausmini https://ausmini.com/forums/ |
|
| MK 2 WIRING CS https://ausmini.com/forums/viewtopic.php?f=2&t=101434 |
Page 1 of 1 |
| Author: | p7676 [ Fri Jul 15, 2022 6:16 pm ] |
| Post subject: | MK 2 WIRING CS |
Hello All i seem to remember one of our members made a simple diagram of the wires behind the dash .The wires are the fuel gauge temp etc. Has anyone got a copy. I used vinwire harness . Thanks Allen |
|
| Author: | Mick [ Tue Jul 19, 2022 3:14 pm ] |
| Post subject: | Re: MK 2 WIRING CS |
I wonder if these help? They're a different way of looking at the wiring diagrams for a Mk2. From the Australian Supplement to the AKD4935 5th Edition (1970) |
|
| Author: | cooperess [ Tue Jul 19, 2022 4:10 pm ] |
| Post subject: | Re: MK 2 WIRING CS |
Did you have trouble with the Vinwire solenoid wires like I did? |
|
| Author: | timmy201 [ Tue Jul 19, 2022 4:46 pm ] |
| Post subject: | Re: MK 2 WIRING CS |
Mick wrote: I wonder if these help? They're a different way of looking at the wiring diagrams for a Mk2. From the Australian Supplement to the AKD4935 5th Edition (1970) I don't suppose they'd have a similar diagram for the 850? It's a much easier diagram to look at |
|
| Author: | Mick [ Tue Jul 19, 2022 7:37 pm ] |
| Post subject: | Re: MK 2 WIRING CS |
timmy201 wrote: Mick wrote: I wonder if these help? They're a different way of looking at the wiring diagrams for a Mk2. From the Australian Supplement to the AKD4935 5th Edition (1970) I don't suppose they'd have a similar diagram for the 850? It's a much easier diagram to look at They don't I'm sorry. There is an Oz production diagram, but it is the one you will already know. |
|
| Author: | p7676 [ Tue Jul 19, 2022 10:05 pm ] |
| Post subject: | Re: MK 2 WIRING CS |
thanks for the input all done now. everything working well the wires for the solenoid were correct. I used a transistorised voltage stabiliser. for the gauges. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|