| ausmini https://ausmini.com/forums/ |
|
| Graphite grease - steering column top bush https://ausmini.com/forums/viewtopic.php?f=2&t=101424 |
Page 1 of 1 |
| Author: | timmy201 [ Tue Jul 12, 2022 9:52 pm ] |
| Post subject: | Graphite grease - steering column top bush |
The workshop manual says to use graphite based grease on the top polythene bush. Does anyone have a recommendation on the specific graphite grease, or do I just use the normal wheel bearing or CV moly grease or powdered graphite I’ve already got? |
|
| Author: | drmini in aust [ Tue Jul 12, 2022 10:17 pm ] |
| Post subject: | Re: Graphite grease - steering column top bush |
I'd use molygrease it's taken over from the graphite of yesteryear. |
|
| Author: | timmy201 [ Thu Jul 14, 2022 9:35 am ] |
| Post subject: | Re: Graphite grease - steering column top bush |
Thanks Kev |
|
| Author: | eightfifty [ Thu Jul 14, 2022 11:16 pm ] |
| Post subject: | Re: Graphite grease - steering column top bush |
- |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|