| ausmini https://ausmini.com/forums/ |
|
| Engine machining Melbourne https://ausmini.com/forums/viewtopic.php?f=2&t=101061 |
Page 1 of 1 |
| Author: | Frog Johnson [ Mon Jul 19, 2021 9:55 pm ] |
| Post subject: | Engine machining Melbourne |
Hi All, I am in need of recommendations for a place to get a block bored and a check of the crank / mains etc. in Melbourne. I did a search and found a thread from about 5 years ago recommending Orger Engines and BNB engines- however things change over time and didn’t know if these were still the go. Any help would be greatly appreciated |
|
| Author: | MiniPete [ Tue Jul 20, 2021 6:40 am ] |
| Post subject: | Re: Engine machining Melbourne |
I recently had an engine built by Orgers and I am very happy with their service and their workmanship. |
|
| Author: | Frog Johnson [ Wed Jul 21, 2021 9:34 am ] |
| Post subject: | Re: Engine machining Melbourne |
Orger/ Original engines came back and said they “don’t deal with that kind of work. Still looking for suggestions?? |
|
| Author: | winabbey [ Wed Jul 21, 2021 9:44 am ] |
| Post subject: | Re: Engine machining Melbourne |
A list of Mini sympathetic businesses is here - viewtopic.php?f=41&t=83593 Suggest you ring Brian at Link as he could tell you the machine shops they use. |
|
| Author: | MiniPete [ Wed Jul 21, 2021 8:41 pm ] |
| Post subject: | Re: Engine machining Melbourne |
Frog Johnson wrote: Orger/ Original engines came back and said they “don’t deal with that kind of work. Still looking for suggestions?? Wow, I find that really surprising. They were nothing but helpful to me but it was a Chrysler engine not a Mini engine I had them build - (Not sure why that would make a difference) The services tab on their website says they still do this kind of work. Weird. |
|
| Author: | timmy201 [ Thu Jul 22, 2021 6:17 am ] |
| Post subject: | Re: Engine machining Melbourne |
I guess it depends on the shop, their current workload and their workshop capabilities For example, some shops might outsource crank grinding to another specialist Some might prefer to take on full rebuilds and not just a couple of jobs (especially if they’ve got months of work on the books) |
|
| Author: | HistoricRacingS [ Mon Aug 02, 2021 11:49 am ] |
| Post subject: | Re: Engine machining Melbourne |
Give Len a call https://www.racepointdevelopments.com/ He can assist with what you need and a machine shop. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|