Hi all,
A mate has a block and we don’t know what size it is. We expect that it is a 998.
Any help would be appreciated.
Sent from my iPhone using Tapatalk
| ausmini https://ausmini.com/forums/ |
|
| Engine block identity needed https://ausmini.com/forums/viewtopic.php?f=2&t=100922 |
Page 1 of 1 |
| Author: | bludot [ Tue Apr 27, 2021 4:26 pm ] |
| Post subject: | Engine block identity needed |
Hi all, A mate has a block and we don’t know what size it is. We expect that it is a 998. Any help would be appreciated. Sent from my iPhone using Tapatalk |
|
| Author: | TK [ Tue Apr 27, 2021 5:16 pm ] |
| Post subject: | Re: Engine block identity needed |
1100 small bore (edit: at a guess, needs to be measured) |
|
| Author: | 9YaTaH [ Tue Apr 27, 2021 5:26 pm ] |
| Post subject: | Re: Engine block identity needed |
Engine number badly re-stamped as 10018638? Maybe a 998cc thick deck pre A+ (12A497) [Edit: add 12A497] |
|
| Author: | bludot [ Tue Apr 27, 2021 7:50 pm ] |
| Post subject: | Re: Engine block identity needed |
Yeah I was skeptical about the ‘engine number’ hence why I took a few photos of different angles. |
|
| Author: | timmy201 [ Tue Apr 27, 2021 7:53 pm ] |
| Post subject: | Re: Engine block identity needed |
As above it’s a 998/1098 block. If you can find the number on the crank or measure the stroke on the crank it’ll tell you more. |
|
| Author: | drmini in aust [ Tue Apr 27, 2021 9:21 pm ] |
| Post subject: | Re: Engine block identity needed |
1001 prefix. It's a 1098. From a Clubman YG2S7. According to John Smidt's early book. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|