ausmini
https://ausmini.com/forums/

Core Plug Sealer
https://ausmini.com/forums/viewtopic.php?f=2&t=100807
Page 1 of 1

Author:  AJ [ Thu Mar 04, 2021 12:35 pm ]
Post subject:  Core Plug Sealer

What is a good sealer for core plugs

Author:  drmini in aust [ Thu Mar 04, 2021 1:39 pm ]
Post subject:  Re: Core Plug Sealer

Stag is best. However I've used Loctite 515 or Permatex aviation gasket cement successfully.

Author:  Stibbsy [ Thu Mar 04, 2021 2:03 pm ]
Post subject:  Re: Core Plug Sealer

drmini in aust wrote:
Stag is best. However I've used Loctite 515 or Permatex aviation gasket cement successfully.


Doc, I was told stag is vey susceptible to the modern coolants we use these days. I have used loctite 515 with success.

Author:  TK [ Thu Mar 04, 2021 4:02 pm ]
Post subject:  Re: Core Plug Sealer

stag

Author:  Bill B [ Fri Mar 05, 2021 4:05 pm ]
Post subject:  Re: Core Plug Sealer

I used Stag on a leaking plug about 3 years ago and it's still holding OK, with corrosion inhibitor in coolant.

Author:  AJ [ Wed Mar 10, 2021 12:01 pm ]
Post subject:  Re: Core Plug Sealer

Ok thanks for the info :D

Author:  Harley [ Thu Mar 11, 2021 5:05 pm ]
Post subject:  Re: Core Plug Sealer

I put Stag on the core plugs in an engine I did 10 years ago - still not leaking!
Everything else in the mini however....

Author:  mickmini [ Sat Mar 13, 2021 12:01 pm ]
Post subject:  Re: Core Plug Sealer

I used a dab of the mercury non hardening gasket sealer on mine about 14 years ago. No leaks!

Author:  Scoop [ Sat Mar 20, 2021 8:08 am ]
Post subject:  Re: Core Plug Sealer

Aviation sealer or Wurth pipe seal. Never had any issues with either.

Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/