ausmini
https://ausmini.com/forums/

Wind Up Window Door Strap
https://ausmini.com/forums/viewtopic.php?f=2&t=100494		 Page 1 of 1
Author:  cooperess [ Thu Oct 29, 2020 9:50 am ]
Post subject:  Wind Up Window Door Strap
There are several items not shown in the attached picture which are not referred to the parts manuals. Can you identify them?

Attachment:
Mini Wind Up Window Door Strap (2).JPG
Author:  timmy201 [ Thu Oct 29, 2020 10:00 am ]
Post subject:  Re: Wind Up Window Door Strap
Items not shown that aren’t in the manual?
Author:  cooperess [ Thu Oct 29, 2020 10:26 am ]
Post subject:  Re: Wind Up Window Door Strap
timmy201 wrote:
Items not shown that aren’t in the manual?


That's right
1. half U shaped pin
2. metal triangular reinforing plate
3. rectangular reinforcing plate
4. dished washers
These are just some of the parts I am talking about.
Author:  winabbey [ Thu Oct 29, 2020 10:30 am ]
Post subject:  Re: Wind Up Window Door Strap
Try these pages. The images are incorrect (outside and inside door handles, sliding windows) but the part numbers should be OK.

Attachment:
PUB1012 RC06 L.jpg


Attachment:
PUB1012 RC06 R.jpg


Attachment:
PUB1012 RC05 R.jpg
Author:  DavidE [ Thu Oct 29, 2020 11:31 am ]
Post subject:  Re: Wind Up Window Door Strap
cooperess wrote:
There are several items not shown in the attached picture which are not referred to the parts manuals. Can you identify them?

Attachment:
Mini Wind Up Window Door Strap (2).JPG


The door strap parts are included in the MK 1998 - 1999 Catalogue, except for the strap locking pin.
Author:  winabbey [ Thu Oct 29, 2020 11:43 am ]
Post subject:  Re: Wind Up Window Door Strap
The pin is included in the Clubman parts book PUB1052 - part HYA3940.

Note the image is of a round-nose with sliding windows. :shock:

Attachment:
PUB1052 page RE2 RE3.jpg


Attachment:
PUB1052 page RE3.jpg
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/