| ausmini https://ausmini.com/forums/ |
|
| 3d printed bulkhead heater blank https://ausmini.com/forums/viewtopic.php?f=2&t=100294 |
Page 1 of 1 |
| Author: | Cornholio351239 [ Sat Aug 15, 2020 11:09 am ] |
| Post subject: | 3d printed bulkhead heater blank |
No heater on my morris mini poverty pack so decided to print a blanking plate in abs. Came out well I think. Attachment: IMG_20200815_085619.jpg Attachment: IMG_20200815_090212.jpg Attachment: IMG_20200815_090225.jpg
|
|
| Author: | Mick [ Sat Aug 15, 2020 1:13 pm ] |
| Post subject: | Re: 3d printed bulkhead heater blank |
I like the simplicity of your repair. Vey innovative! |
|
| Author: | pdpsing [ Sat Aug 15, 2020 2:48 pm ] |
| Post subject: | Re: 3d printed bulkhead heater blank |
Looks really good, nice job. Let us know if/when you print the 2 piece centre bulkhead seal. Sent from my SM-A305YN using Tapatalk |
|
| Author: | Cornholio351239 [ Sun Aug 16, 2020 1:43 am ] |
| Post subject: | Re: 3d printed bulkhead heater blank |
pdpsing wrote: Looks really good, nice job. Let us know if/when you print the 2 piece centre bulkhead seal. Sent from my SM-A305YN using Tapatalk Yeah that's my next job on the printing list. I need to work out the clearance for the SU carb. In the meantime i've just printed the heater hose blank on the right hand side of the bulkhead. Saved myself about $40 in those 2 parts. 
|
|
| Author: | Cornholio351239 [ Wed Sep 02, 2020 9:08 pm ] |
| Post subject: | Re: 3d printed bulkhead heater blank |
Bulkhead large cover now printed. Just waiting for 50mm and 40mm grommets to arrive. Anyone interested in one? Attachment: IMG_20200902_190149.jpg Attachment: IMG_20200902_190238.jpg Attachment: IMG_20200902_190207.jpg
|
|
| Author: | pdpsing [ Wed Sep 02, 2020 9:12 pm ] |
| Post subject: | Re: 3d printed bulkhead heater blank |
I'm interested. Is it 2 piece? Sent from my SM-A305YN using Tapatalk |
|
| Author: | Cornholio351239 [ Wed Sep 02, 2020 9:31 pm ] |
| Post subject: | Re: 3d printed bulkhead heater blank |
pdpsing wrote: I'm interested. Is it 2 piece? Sent from my SM-A305YN using Tapatalk Nah, decided to print one piece and slit the top so it can twist around the wiring loom. The grommet will then keep it together. The abs has some flex to get it around the loom without the plastic breaking. It's a cheaper solution than the Japanese one which is about $125! This one utilises the existing bolt locations at the top and slots over the bottom section of the hole without needing to drill more holes in the bulkhead. |
|
| Author: | pdpsing [ Wed Sep 02, 2020 9:34 pm ] |
| Post subject: | Re: 3d printed bulkhead heater blank |
Sounds good, how much? Sent from my SM-A305YN using Tapatalk |
|
| Author: | Cornholio351239 [ Wed Sep 02, 2020 10:34 pm ] |
| Post subject: | Re: 3d printed bulkhead heater blank |
I was thinking $40. As its the first one and it might need some modification I can send to you for nothing so you can trial fit and give me some feedback. My mini is about 4 years away from needing it yet.  It's going to be a couple of weeks until the grommets arrive though but I can send the plate to trial fit. |
|
| Author: | pdpsing [ Thu Sep 03, 2020 10:10 am ] |
| Post subject: | Re: 3d printed bulkhead heater blank |
Happy to help with a trial fit. At the least let me cover your costs - materials, postage etc. PM me with your bank details. Sent from my SM-A305YN using Tapatalk |
|
| Author: | simonw [ Sat Sep 05, 2020 6:51 am ] |
| Post subject: | Re: 3d printed bulkhead heater blank |
Interested : I’m ready to fit . Pm with your details  Sent from my iPhone using Tapatalk |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|