ausmini
https://ausmini.com/forums/

Mini Insulation ID
https://ausmini.com/forums/viewtopic.php?f=2&t=100184		 Page 1 of 1
Author:  cooperess [ Sat Jul 11, 2020 3:52 pm ]
Post subject:  Mini Insulation ID
Trying to ID this item to know where it goes in my Mk2. Hope you can help.

Attachment:
Mini Felt Insulation (3).JPG
Author:  Goldbrocade_62 [ Sat Jul 11, 2020 4:25 pm ]
Post subject:  Re: Mini Insulation ID
It goes in the engine bay bulkhead behind master cylinders covers speedo hole etc
Author:  Bill B [ Sat Jul 11, 2020 5:58 pm ]
Post subject:  Re: Mini Insulation ID
It doesn't look like the bulkhead lining in my Mk2, or Mk1. Mine has a cut out to skirt around the master cylinders, slots for the 2 hinges and speedo cable and side pieces to fit behind the windscreen wiper motor on one side and another plain bit to finish off on driver's side.
Is it a parcel shelf dash liner?
Author:  Goldbrocade_62 [ Sat Jul 11, 2020 7:20 pm ]
Post subject:  Re: Mini Insulation ID
Bill B wrote:
It doesn't look like the bulkhead lining in my Mk2, or Mk1. Mine has a cut out to skirt around the master cylinders, slots for the 2 hinges and speedo cable and side pieces to fit behind the windscreen wiper motor on one side and another plain bit to finish off on driver's side.
Is it a parcel shelf dash liner?

I think maybe clubman shape
Author:  gtogreen1969 [ Sat Jul 11, 2020 8:54 pm ]
Post subject:  Re: Mini Insulation ID
Goldbrocade_62 wrote:
I think maybe clubman shape


Pretty close

Attachment:
HYA1128.jpg
Author:  iansmini67 [ Sat Jul 11, 2020 11:39 pm ]
Post subject:  Re: Mini Insulation ID
This is what I have. I'm sure this is an original. Can anybody confirm. It may have been cut here and there but generally right.ImageImage

Sent from my SM-G965F using Tapatalk
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/