| ausmini https://ausmini.com/forums/ |
|
| Door Lock barrel https://ausmini.com/forums/viewtopic.php?f=2&t=100099 |
Page 1 of 1 |
| Author: | cooperess [ Wed Jun 17, 2020 1:00 pm ] |
| Post subject: | Door Lock barrel |
Attachment: Mini Door Lock Barrel 001.JPG Where can I get this door lock barrel to suit 1969 Mini. |
|
| Author: | winabbey [ Wed Jun 17, 2020 2:08 pm ] |
| Post subject: | Re: Door Lock barrel |
The BMC part number is HYA3087. I doubt you will find any new ones being sold separately to the handle but give it a try. It's made by Wilmot Breeden P/L. The usual solution is to get the barrel out of a boot handle. It will need to be trimmed down in a lathe to suit the door handle as there's a slight difference. If you compare the two side by side you will see what material needs to be removed. |
|
| Author: | cooperess [ Wed Jun 17, 2020 4:14 pm ] |
| Post subject: | Re: Door Lock barrel |
So I am on an impossible mission to buying a new barrel? |
|
| Author: | winabbey [ Wed Jun 17, 2020 4:35 pm ] |
| Post subject: | Re: Door Lock barrel |
cooperess wrote: So I am on an impossible mission to buying a new barrel? Never say never, but I'm not aware of a source. Second-hand would seem to be your most likely option. |
|
| Author: | Bill B [ Wed Jun 17, 2020 8:16 pm ] |
| Post subject: | Re: Door Lock barrel |
How close would these door & boot tumbler sets for a Mk1/2 UK mini be? I'm sure that BMC Aust minis always used W&B locks and keys and doubt they would ever have been local manufacture. http://www.minispares.com/product/Class ... 0to%20shop |
|
| Author: | DavidE [ Thu Jun 18, 2020 8:02 am ] |
| Post subject: | Re: Door Lock barrel |
cooperess wrote: Attachment: Mini Door Lock Barrel 001.JPG Where can I get this door lock barrel to suit 1969 Mini. Do you want new, or one that can be repaired/re-keyed by a locksmith? |
|
| Author: | cooperess [ Thu Jun 18, 2020 8:23 am ] |
| Post subject: | Re: Door Lock barrel |
DavidE wrote: Do you want new, or one that can be repaired/re-keyed by a locksmith? Either or both, just let me know what you have. |
|
| Author: | DavidE [ Thu Jun 18, 2020 3:09 pm ] |
| Post subject: | Re: Door Lock barrel |
cooperess wrote: DavidE wrote: Do you want new, or one that can be repaired/re-keyed by a locksmith? Either or both, just let me know what you have. I don't have any new, but have a number of boot handles complete, one with key, the others not, but the locksmith I use seems to have a stock of bits. Also have a door lock; the escutcheon is damaged (the remover seems to have forgotten the 3rd screw) but the barrel is there and seems undamaged externally. |
|
| Author: | drmini in aust [ Thu Jun 18, 2020 3:19 pm ] |
| Post subject: | Re: Door Lock barrel |
I have sold him a new UK MK 1 barrel and key. It looks close to his pic. But no guarantees it'll fit. |
|
| Author: | stewartp [ Thu Jun 18, 2020 7:12 pm ] |
| Post subject: | Re: Door Lock barrel |
my lock barrel was frozen in the handle, my locksmith gave up. I spent over 6 month's on and off getting it to free up and work smoothly. Tried Protecta lock that the locksmith recommended, wd 40 , diesel, a product called yield, and 50% acetone and auto transmission fluid. I left it in the freezer then in the sun on a 40 degree day. It now works perfectly. Persistence won. Most locksmiths can download the key information and provide you with a key, mine cost $22.00 and $11 for a second key. Somerford mini can supply keys cut to the FS number. |
|
| Author: | cooperess [ Wed Jun 24, 2020 7:15 pm ] |
| Post subject: | Re: Door Lock barrel |
Attachment: Dscf0040.jpg
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|