Welcome back.
Yes it does mean that.
It would go (edit- a little) better with a 12G202 as used on Morris 1100 motors.
| ausmini https://ausmini.com/forums/ |
|
| Giving it a second chance. https://ausmini.com/forums/viewtopic.php?f=2&t=100051 |
Page 1 of 1 |
| Author: | br3nt [ Fri May 29, 2020 9:27 pm ] |
| Post subject: | Giving it a second chance. |
Hey all - after a somewhat bumpy start to this forum, I’ve decided to try again after some persuasion from a friend. So... I”m Br3nt - restoring a 75 Clubman and have so many questions that I can’t think straight. I had a look at the engine that came with the car, on the block it’s a 10YC... and on the head it stamped with 2A629 - if I’m correct - and I’m prob not, does that mean it’s a 998 head and a 1098 block? Cheers Br3nt |
|
| Author: | drmini in aust [ Fri May 29, 2020 9:31 pm ] |
| Post subject: | Re: Giving it a second chance. |
Welcome back. Yes it does mean that. It would go (edit- a little) better with a 12G202 as used on Morris 1100 motors. |
|
| Author: | 9YaTaH [ Sat May 30, 2020 8:44 am ] |
| Post subject: | Re: Giving it a second chance. |
or if the existing head was overhauled and tidied up maybe Doc... Welcome back Br3nt...best advice is to start a dedicated thread for you car where all the Q&As can be found in the one place... |
|
| Author: | cruiser23 [ Sat May 30, 2020 8:26 pm ] |
| Post subject: | Re: Giving it a second chance. |
Stick with it br3nt, it is a really good forum with just a couple of rogue elements that need to be ignored. |
|
| Author: | gtogreen1969 [ Sat May 30, 2020 8:32 pm ] |
| Post subject: | Re: Giving it a second chance. |
If the Engine is 10YCTAH then it was from a Mini K |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|