Ausmini
It is currently Wed Jul 23, 2025 12:37 am

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 
  Print view Previous topic | Next topic 
Author Message
Gezo
 Post subject: Needle size
PostPosted: Sat Feb 11, 2017 9:41 am 
Offline
848cc
848cc

Joined: Mon Apr 19, 2004 4:58 pm
Posts: 340
What needles should I be using for twin 1/1/2 carbs on a 1275 motor with 266 cam and mild head work?
Top
 Profile  
 
drmini in aust
 Post subject: Re: Needle size
PostPosted: Sat Feb 11, 2017 9:49 am 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39755
Location: near Baulkham Hills, NSW
CP4 or no 6.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
simon k
 Post subject: Re: Needle size
PostPosted: Sat Feb 11, 2017 12:23 pm 
Offline
Yay For Hay!
User avatar

Joined: Wed Sep 08, 2004 9:27 pm
Posts: 15912
Location: Wodonga - Vic/NSW border
ditto #6, mine didn't like CP4

_________________
did I tell you that I won a trophy?
Top
 Profile  
 
Gezo
 Post subject: Re: Needle size
PostPosted: Sat Feb 11, 2017 3:34 pm 
Offline
848cc
848cc

Joined: Mon Apr 19, 2004 4:58 pm
Posts: 340
Thanks guys. I' ll see what mine are and swap them out to CP 4 if there not.
Top
 Profile  
 
carbon
 Post subject: Re: Needle size
PostPosted: Sun Feb 12, 2017 1:15 am 
Offline
848cc
848cc

Joined: Fri Jan 02, 2015 3:59 am
Posts: 41
Also worth checking what dashpot springs you have fitted, blue will likely work best with this spec.

If you try red springs be aware that recent replacements can be much stronger than originals.
Top
 Profile  
 
Gezo
 Post subject: Re: Needle size
PostPosted: Sat Feb 18, 2017 11:45 am 
Offline
848cc
848cc

Joined: Mon Apr 19, 2004 4:58 pm
Posts: 340
Where do you buy the CP6 needle?
Top
 Profile  
 
drmini in aust
 Post subject: Re: Needle size
PostPosted: Sat Feb 18, 2017 11:51 am 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39755
Location: near Baulkham Hills, NSW
Gezo wrote:
Where do you buy the CP6 needle?

It is not a CP6, it is a `6'.
:wink:
Can buy from SU Midel in Sydney.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Gezo
 Post subject: Re: Needle size
PostPosted: Sat Feb 18, 2017 12:02 pm 
Offline
848cc
848cc

Joined: Mon Apr 19, 2004 4:58 pm
Posts: 340
Thanks . Has anyone heard of a OP4 needle?
Top
 Profile  
 
outbackmini
 Post subject: Re: Needle size
PostPosted: Sat Feb 18, 2017 4:11 pm 
Offline
848cc
848cc

Joined: Mon Aug 01, 2016 4:35 pm
Posts: 18
Location: Port Augusta SA
My 850 is nearly finished but has no power...I bought a new 1.25 twin right handed by mistake - so bought the left never intending to use them together but hey, what a waste???

so, I think it MAY be mismatched needles as I suppose the left is sold intending to be used solo but the right would normally be jetted for twins...unless you buy them as a pair.

If that is the problem then new jets may help.

Can anyone suggest needles for a bog standard 37000 mile 850 with twin 1.25s?

Dashpot springs?

Where can I buy them? Minisport don't seem to sell needles.
Top
 Profile  
 
goodie
 Post subject: Re: Needle size
PostPosted: Sat Feb 18, 2017 6:09 pm 
Offline
1275cc
1275cc
User avatar

Joined: Thu Aug 31, 2006 7:56 pm
Posts: 2663
Location: Muswellbrook -- NSW
outbackmini wrote:
My 850 is nearly finished
Can anyone suggest needles for a bog standard 37000 mile 850 with twin 1.25s? Dashpot springs?

Where can I buy them? Minisport don't seem to sell needles.



Try here , http://www.sumidel.com/contact_us.html
Top
 Profile  
 
drmini in aust
 Post subject: Re: Needle size
PostPosted: Sat Feb 18, 2017 6:29 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39755
Location: near Baulkham Hills, NSW
Gezo wrote:
Thanks . Has anyone heard of a OP4 needle?

Can't see any OP listed on mintylamb, most likely its a CP4.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Gezo
 Post subject: Re: Needle size
PostPosted: Sat Feb 18, 2017 7:18 pm 
Offline
848cc
848cc

Joined: Mon Apr 19, 2004 4:58 pm
Posts: 340
Definitely stamped 0P4 , I reckon it is a CP4, as well Going to try some 6 needles ad it has a small flat spot down low.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 99 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

cron

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.