ausmini https://ausmini.com/forums/ |
|
SU Carburettor Suction Chamber Piston Spring Identification https://ausmini.com/forums/viewtopic.php?f=25&t=91804 |
Page 1 of 1 |
Author: | 1018cc [ Thu Feb 11, 2016 12:20 pm ] |
Post subject: | SU Carburettor Suction Chamber Piston Spring Identification |
After some investigation today - I have found out I have blue springs in my SUs, not red as I originally assumed (the springs have never had paint on them). I had an opportunity to sit side by side my (unknown) springs, known red springs and known yellow springs: Wire diameter: Blue ~0.7mm Wire diameter: Red ~0.9mm Wire diameter: Yellow ~1.0mm gtogreen1969 wrote: Can you add this to it as well? Light Blue 2.5OZ @ 2.625" AUC4587 Red 4.5OZ @ 2.635" AUC4387 Yellow 8OZ @ 2.750" AUC1167 Green 12OZ @ 3.000" AUC1170 Hopefully this will help some of you out. |
Author: | Mick [ Thu Feb 11, 2016 6:05 pm ] |
Post subject: | Re: SU Carburettor Suction Chamber Piston Spring Identificat |
Thanks Nick, I might drop this in the How To if I may. |
Author: | 1018cc [ Thu Feb 11, 2016 6:22 pm ] |
Post subject: | Re: SU Carburettor Suction Chamber Piston Spring Identificat |
Go for it mate. I thought I'd post it up as I'd never found anything similar on the net (which didn't help me in my situation as the paint from my springs was long gone!). |
Author: | Morris 1100 [ Thu Feb 11, 2016 6:30 pm ] |
Post subject: | Re: SU Carburettor Suction Chamber Piston Spring Identificat |
Good work. |
Author: | gtogreen1969 [ Thu Feb 11, 2016 7:46 pm ] |
Post subject: | Re: SU Carburettor Suction Chamber Piston Spring Identificat |
Can you add this to it as well? Light Blue 2.5OZ @ 2.625" AUC4587 Red 4.5OZ @ 2.635" AUC4387 Yellow 8OZ @ 2.750" AUC1167 Green 12OZ @ 3.000" AUC1170 |
Author: | 1018cc [ Thu Feb 11, 2016 7:49 pm ] |
Post subject: | Re: SU Carburettor Suction Chamber Piston Spring Identificat |
gtogreen1969 wrote: Can you add this to it as well? Light Blue 2.5OZ @ 2.625" AUC4587 Red 4.5OZ @ 2.635" AUC4387 Yellow 8OZ @ 2.750" AUC1167 Green 12OZ @ 3.000" AUC1170 Done. |
Author: | Morbo28 [ Thu Feb 11, 2016 9:01 pm ] |
Post subject: | Re: SU Carburettor Suction Chamber Piston Spring Identificat |
Very handy thanks |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |