ausmini https://ausmini.com/forums/ |
|
EP91 Glanza - Rear & Roof Wiring Loom https://ausmini.com/forums/viewtopic.php?f=23&t=71484 |
Page 1 of 1 |
Author: | arjay [ Sat Jun 25, 2011 10:14 am ] |
Post subject: | EP91 Glanza - Rear & Roof Wiring Loom |
Hey guys. I figured with all the mixed information about wire colours for the the EP82 and EP91 wiring looms, id post up my findings. I basically traced every single wire back through the loom. This is for anyone in the present or future who will be doing the 4E-FTE conversion using a halfcut from an EP91 - '96-'97. I'd assume '98-'99 model would be the same. Admins: Could you sticky this? if you want... Rear Wiring Loom Brake Lights Green/Red = Brake Light Green = Park Light White/Black = Ground (-) Indicators Green/Yellow = Right Indicator Green/Black = Left Indicator White/Black = Ground (-) Door Switch Red = Right Door (Odometer A4) Red/White = Left Door (Odometer A3) Pink = Seatbelt Light (Odometer C8 ) Fuel Pump Blue/White = Fuel Pump 12v+ White/Black = Ground -FP Yellow/Black = Fuel Level Sender (Odometer C4) Brown = Ground –FLS Black/Yellow = Low Fuel Light (Odometer C3) Roof Wiring Loom Interior Light: Red/White = Dome Light – DOOR position join (Odometer A3) Blue/Yellow = Dome Light – 12v+ [F12 - MAIN] Rear Wiper Motor Blue = Rear Wiper Motor 12V+ [F5] Blue/White = Rear Wiper Motor ‘ON’ Position Pink = Rear Wiper Motor ‘INT’ Position Spoiler Light: Green = Spoiler Park Light Green/Red = Spoiler Brake Light Red/Black = Reverse Light (Hatch) Black = Heated rear window 12V+ [F1] White/Black = Ground (-) Blue = Door Control ECU (Orange Plug) Yellow/Black = Door Control ECU (Orange Plug) If anyone needs anymore info.. Dont hesitate to PM me. Also.. Heres a link to my modified EP91 Wiring Diagram. https://picasaweb.google.com/lh/photo/e ... directlink Click DOWNLOAD for the full size. Looks like this: |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |