ausmini https://ausmini.com/forums/ |
|
Double Grey Clutch Diaprhagm alternatives https://ausmini.com/forums/viewtopic.php?f=2&t=102273 |
Page 1 of 1 |
Author: | 69cooper [ Tue Apr 16, 2024 2:26 pm ] |
Post subject: | Double Grey Clutch Diaprhagm alternatives |
As the title would suggest looking for everyone's experience our thoughts on the use of a double grey clutch diaphragm in high performance mini race cars , Understanding that C-AEG843 double Grey 's have not been available for some time , what are the other options apart from going the RTS verto clutch path Cheers Mal |
Author: | drmini in aust [ Wed Apr 17, 2024 8:40 am ] |
Post subject: | Re: Double Grey Clutch Diaprhagm alternatives |
https://www.hootaispring.com/diaphragm-springs/ Get some conical springs made to sample, in China or maybe here? Cover should reusable. |
Author: | 69cooper [ Wed Apr 17, 2024 9:50 am ] |
Post subject: | Re: Double Grey Clutch Diaprhagm alternatives |
Hi , yes I will be making some enquiries locally , would be handy if I had a sample so I could get thickness off bevel washer. |
Author: | IndigoBlueCooperS [ Wed Apr 17, 2024 6:55 pm ] |
Post subject: | Re: Double Grey Clutch Diaprhagm alternatives |
Have you spoken to Matt Read? He was doing some interesting stuff to increase clamping pressure on the diaprhagm clutch. |
Author: | 69cooper [ Wed Apr 17, 2024 7:15 pm ] |
Post subject: | Re: Double Grey Clutch Diaprhagm alternatives |
No I haven't thanks for the lead , I will reach out to him |
Author: | GR [ Thu Apr 18, 2024 6:33 pm ] |
Post subject: | Re: Double Grey Clutch Diaprhagm alternatives |
Hi Mal Just set the grey dot up so the spring is flat when all bolted down that will handle 200HP + Graham Russell |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |